Wine Guardian
Wine Guardian Wall Sleeve For TTW Installation 71H0351-02-D
Regular price $160.00 USDUnit price
Wine Guardian
Wine Guardian Sentinel Series Duct Collar for D025, DP25, DS025 & SP25 Cooling Systems 19H0109-00
Regular price $248.00 USDUnit price
Wine Guardian
Wine Guardian Wall Sleeve and Hardware 94H0054-00
Regular price $146.00 USDUnit price
Wine Guardian
Wine Guardian 4-Pack Humidifier Drip Pads 94H0022-00
Regular price $140.00 USDUnit price
Wine Guardian
Wine Guardian Remote Interface Controller 91H0105-01
Regular price $460.00 USDUnit price
Wine Guardian
Wine Guardian 10" Round Duct Connection 19H0116-00
Regular price $288.00 USDUnit price
Genuine Wine Guardian Parts, Matched to Your Unit
When a Wine Guardian cooling system needs service or a through-the-wall install needs finishing, the right part is the one built for your exact unit. This catalog carries genuine Wine Guardian components: wall sleeves, duct collars and kits, flexible ductwork, remote sensors and controllers, communication cables, and humidifier drip pads.
Match the part to the model number and serial printed on your unit, then order the exact component. As an authorized Wine Guardian dealer in the USA, we supply parts built to the original unit specification so fit, capacity, and warranty coverage stay intact.
Wine Guardian Parts Buying Advantages
Genuine Components
Authentic Wine Guardian parts built to the original unit specification.
Model-Matched
Ordered by unit model and serial, so the part fits your exact system.
Install Coverage
Wall sleeves, duct collars, kits, and ductwork to finish any installation.
Authorized Dealer
Wine Cellar Authority is an authorized Wine Guardian parts dealer.
Repair, Not Replace
A single component often restores a unit at a fraction of full replacement cost.
Ships Nationwide
Wine Guardian parts ship across the United States, calculated at checkout.
Wine Guardian Parts by Category
Duct Collars & Kits
Supply, return, and exhaust duct collars plus complete collar kits for through-the-wall and Sentinel Series units. Sized by outlet diameter and matched to your model.
Flexible Ductwork
Insulated flexible ductwork in 8 inch and 10 inch diameters for supply and return runs on ducted and through-the-wall installations.
Wall Sleeves
Wall sleeves and hardware that frame the opening for a through-the-wall unit and support a clean, sealed installation.
Humidifier Drip Pads
Replaceable drip pads for the Wine Guardian humidifier, available as single pads and a 4-pack. A consumable that should be replaced periodically.
Sensors & Controllers
The remote interface controller and remote sensor that set and monitor cellar temperature and humidity from outside the wine room.
Communication Cables
Communication cables that connect the remote interface and sensor to the unit, in lengths for standard and longer runs.
Looking for the unit itself? Compare the full range of Wine Guardian wine cellar cooling systems, or browse every product in the complete Wine Guardian range. For a through-the-wall replacement, see the Wine Guardian through-the-wall systems.
Genuine (OEM) vs Universal Wine Guardian Parts
| Consideration | Genuine Wine Guardian | Universal Part |
|---|---|---|
| Exact fit to your unit model and serial | ✓ | |
| Built to original unit specification | ✓ | |
| Correct duct diameter and connections | ✓ | |
| Preserves manufacturer warranty coverage | ✓ | |
| May require adapting or fabrication | ✓ |
Genuine Wine Guardian parts remove the guesswork of fitment and protect your unit's rated performance and warranty. Match every part to the model and serial on your rating label before ordering.
Popular Wine Guardian Parts
A few of the most commonly ordered components across the Wine Guardian range.
Sets and monitors temperature and humidity from outside the cellar.
Replaceable drip pads for the Wine Guardian humidifier.
Frames the wall opening for a through-the-wall unit.
How do I find the right Wine Guardian replacement part?
Match the part to the model number and serial printed on the rating label of your Wine Guardian unit. Duct collars, wall sleeves, and controllers are model-specific, so ordering by the exact unit ensures correct fit and connections. If you are unsure which component you need, call a specialist before ordering.
Are these genuine Wine Guardian parts?
Yes. Wine Cellar Authority is an authorized Wine Guardian dealer, and every part is a genuine Wine Guardian component built to the original unit specification. Genuine parts confirm exact fit, preserve rated performance, and protect manufacturer warranty coverage.
What humidifier pads does Wine Guardian use?
Wine Guardian humidifiers use replaceable drip pads that wick water for evaporative humidification. Pads are consumable and should be replaced periodically to maintain output and hygiene. This collection carries both single drip pads and a 4-pack for the freestanding humidifier.
What controller or thermostat works with a Wine Guardian unit?
Wine Guardian units use a remote interface controller and remote sensor to set and monitor temperature and humidity. The remote interface controller mounts outside the cellar, and the remote sensor reads conditions inside. Both connect with a Wine Guardian communication cable.
Do I need a wall sleeve and duct collar for a through-the-wall install?
A through-the-wall Wine Guardian unit uses a wall sleeve to frame the opening and duct collars to connect supply and exhaust. Sentinel Series units use their own duct collar kits. Match the sleeve and collar kit to your specific model and wall thickness.
Can I replace a Wine Guardian part myself?
Accessories such as wall sleeves, duct collars, ductwork, cables, and humidifier pads are straightforward to install with basic tools. Sealed refrigerant-circuit work should be handled by a licensed HVAC professional to protect safety and warranty coverage.
How do Wine Guardian parts ship, and how are warranty and returns handled?
Wine Guardian parts and accessories ship to addresses across the United States, with shipping calculated at checkout. Warranty and returns are handled through the manufacturer.
Need Help Finding the Right Wine Guardian Part?
Talk to a specialist about matching a duct collar, wall sleeve, controller, sensor, or humidifier pad to your Wine Guardian model. This guidance is general and intended to help identify the right component. Sealed refrigerant-circuit repairs should be confirmed and performed by a licensed HVAC professional.