FREE SHIPPING On Most Orders! Call or Text +1 (888) 885-1670 to get the lowest price online!
Start with a free expert consult—cooling system sizing, racking options, and zero pressure.
To find the right replacement part, note the brand, model and serial number on your cooling unit's label, identify the failing part, and confirm the exact part with the manufacturer...
Jim Hopper
Wine cooler error codes are brand and model specific: E1 on a Breezaire Sentry III means insufficient cooling at start-up, while E1 on a WhisperKOOL SC means a bottle probe...
Jim Hopper
Replace a wine cooling unit when it can no longer hold temperature after repairs, needs repeated or costly repairs, or is out of warranty and failing. Compare the repair cost...
Jim Hopper
Mold in a wine cellar comes from sustained high humidity, still air and condensation. Keep humidity steady, move air gently and fix leaks early, and call a qualified remediation professional...
Jim Hopper
Most wine cooling units reset by switching off the power for a few minutes, and the Breezaire Sentry III also has a manual reset (hold the WARMER button for at...
Jim Hopper
A wine cooling unit that keeps shutting off is usually protecting itself from overheating, a tripped high pressure switch, a power problem or a faulty sensor. Fix the cause, such...
Jim Hopper
Most wine cooler leaks are condensate water from a clogged drain line, a damaged or misaligned drain pan, or excess humidity, and cleaning the drain and leveling the unit often...
Jim Hopper
A wine cellar that will not cool is most often caused by a dirty condenser coil, a blocked or overheated exhaust space, an undersized unit or air leaking into the...
Jim Hopper
Installing a wine cellar cooling unit depends on the format: through-the-wall units are often a homeowner install, while split systems need a licensed refrigeration technician. Every format needs airflow clearance,...
Jim Hopper
Breezaire's manuals call for inspecting and cleaning the condenser coil every 3 months, keeping the exhaust side clear and handling condensate with the built-in drain. The units need little other...
Jim Hopper
A steady, low hum from the compressor and fans is normal in a wine fridge or cellar cooling unit. Loud buzzing, rattling, grinding or knocking usually means a dirty fan,...
Jim Hopper
Wine cellar humidity problems usually come from the room: leaks, a missing vapor barrier, poor airflow or the cooling setup. Measure at bottle level, fix the cause, then use a...
Jim Hopper
Most wine cellar cooling problems trace back to power, thermostat settings, blocked airflow, dirty coils or a leaky cellar, and a few quick checks solve many of them. This guide...
Jim Hopper
placeholder