Written by Jim Hopper, Wine Cooling Expert · Updated September 2026
Where to Get Genuine Breezaire Parts and How to Order the Right One
Genuine Breezaire replacement parts are sold through Breezaire and its authorized dealers, including Wine Cellar Authority. To order the right part, you need the model and serial number from your unit's label, the series (WKL, WKCE or WKSL), and a clear description of the symptom or display code.
Refrigerant, compressor and electrical repairs belong with a qualified technician. If your unit is still under warranty, contact your dealer before you replace anything, because Breezaire's warranty is voided by repair or alteration by anyone other than Breezaire.
In short: identify the unit first, then the part. Match the symptom to a component with the parts table below, confirm the part number with your dealer using your model and serial number, and keep the condenser coil clean every 3 months so the new part is not fighting a blocked unit. Breezaire parts ship free within the contiguous United States.
Why Genuine Breezaire Parts Matter
Breezaire units are built as matched systems: the compressor, coils, fans and Sentry III controller are specified together for each model. A genuine part is made to that specification, so it fits, connects and behaves the way the unit was designed to.
The warranty is the other reason. Breezaire's limited warranty states that alteration, repair or attempted repair of the unit by anyone other than Breezaire voids the warranty. While your unit is covered, talk to your dealer before you change a part.
Genuine Breezaire parts vs aftermarket parts
| Factor | Genuine Breezaire part | Aftermarket part |
|---|---|---|
| Fit | Made to the model's voltage, airflow and size specifications | May not fit or connect properly |
| Performance | Keeps the system operating as designed | Can add noise or cause system errors |
| Warranty | Supports a covered repair through your dealer | Alteration of the unit can void Breezaire's warranty |
| Part confirmation | Confirmed by model and serial number | Compatibility is up to you to verify |
For the full comparison, including when a universal part is worth considering, read Breezaire OEM vs universal parts. For parts across every brand we carry, see our guide on finding the right replacement part for any wine cellar cooling unit.
Types of Common Replacement Parts in Breezaire Units
Understanding the key components of your Breezaire wine cooling unit helps you recognize which parts may need replacement over time and why each is important to the system’s performance.
Breezaire components, what they do and how they fail
| Part | Function | Signs of failure |
|---|---|---|
| Sentry III controller | Maintains the set temperature and runs the unit's protection features | Blank or unresponsive display, readings that do not match a separate thermometer |
| Evaporator and condenser fans | Circulate cellar air and release heat | Loud noise, weak airflow, a fan that does not spin |
| Compressor | Drives the cooling process | Unit runs but does not cool, unusual clicking |
| Starting relay | Helps start the compressor motor | Clicking, compressor will not start |
| Sensor or bottle probe | Measures the temperature the controller acts on | Inaccurate readings; a faulty sensor shows "Er" on the Sentry III display |
| Transformer and low voltage relay | Supply and switch low voltage to the controls | Display problems, unit will not power on |
| Condenser and evaporator coils | Release heat outside and absorb heat inside | Poor cooling, frost, overheating when blocked |
| Filter drier and sight glass | Keep the refrigerant circuit clean and show refrigerant flow | Reduced cooling; work for a qualified technician only |
| Condenser grill | Protects the condenser coil on the exhaust side | Blocked or damaged grill, overheating |
Popular genuine parts are listed below, and the full range is in our genuine Breezaire replacement parts collection.
Warning Signs Your Breezaire Unit Needs Replacement Parts
- Inconsistent temperature: the unit struggles to reach or hold the set temperature.
- Unusual noises: loud humming, grinding, clicking or a new sound.
- Display codes or a blank display: the Sentry III flashes a code with the temperature, or does not respond.
- Frost or water: ice on the coil, or water overflowing from the unit.
- Weak airflow: a fan that does not spin, or air that feels much weaker than normal.
If the symptom is noise, our guide to diagnosing a noisy wine cooling unit matches each sound to a cause. For the quietest options if you decide to replace the unit, see the quiet wine cooling units roundup.
Breezaire WKCE 1060 and Sentry III Troubleshooting
The Breezaire WKCE 1060 is a cabinet unit: Breezaire designed the WKCE series, with its cold air discharge on the bottom, for cabinets and credenzas. Most WKCE problems trace back to placement and airflow rather than a failed part.
- Placement: Breezaire's WKCE instructions give the best location as six inches from the ceiling, mounted on a shelf.
- Airflow: keep at least 12 inches clear in front of the cold air outlet and at least 3 feet clear for the warm air discharge from the exterior grille.
- Condenser coil: inspect and vacuum it at least once every three months to prevent air blockage.
- Room temperature: if the air around the cabinet is more than 25°F warmer than the cabinet, cooling capacity is reduced.
Sentry III display codes on Breezaire units
| Display | What the Sentry III manual says it means | What to do |
|---|---|---|
| E1 (flashing with the temperature) | The unit started above 75°F and did not detect enough cooling in the first 45 minutes, so it shut off | Restart with a manual reset or by unplugging for 10 minutes or more, then find the cause |
| AL (with the temperature) | Storage temperature is above the alarm setting (factory setting 62°F); the unit keeps running | Check airflow, the condenser coil and the enclosure seal |
| OH (with the temperature) | Storage temperature stayed above 75°F, so the unit shut off | Wait at least 30 minutes, then try a manual reset; if it repeats, contact your Breezaire dealer |
| Er | A faulty sensor | Have the sensor checked and replaced |
To reset the Sentry III, press and hold the WARMER button for at least 5 seconds; the manual notes that user settings are kept. Our step-by-step guide on resetting a wine cooling unit covers every brand, and the wine cooling error codes guide lists the codes for Breezaire, WhisperKOOL and Wine Guardian controllers.
Reset a Breezaire Sentry III controller
A short walkthrough of the Sentry III reset, the first step after a shutdown code once the cause has been found.
- Sentry III (SIII) controller
- Step by step on the unit
- Useful before ordering a part
Model-Specific Guidance
Parts are specific to the series and model, so know which one you own before you order.
WKL Series
Self-contained units installed upright through the wall, not designed for ductwork on either side. See the Breezaire WKL series units.
WKCE Series
Designed for cabinets and credenzas, with the cold air discharge on the bottom. See the Breezaire WKCE series units.
WKSL Series
A split system of a condensing unit and a fan/coil unit; Breezaire recommends a licensed refrigeration technician. See the Breezaire WKSL split systems.
To compare models side by side, read Breezaire WKL, WKCE and WKSL models compared or our pick of the best Breezaire cooling units reviewed.
How to Identify the Correct Replacement Part
- Find the model and serial number. They are on the unit's label and in your purchase records. Breezaire's warranty does not cover a unit whose serial number cannot be verified, so keep them on file.
- Note the symptom. Write down any display code, noise or change in performance. Photos of the unit and the display help.
- Check the basics. Clean the condenser coil and confirm the exhaust has open space before assuming a part has failed.
- Confirm with your dealer. Share the model (for example WKL 3000 or WKCE 1060), serial number and symptom so the exact part can be confirmed.
Where and How to Order OEM Breezaire Parts
Order genuine parts from Breezaire or an authorized Breezaire dealer. Wine Cellar Authority is an authorized dealer: you can order compressors, coils, fan assemblies, blowers, the Sentry III controller, bottle probes, relays, transformers and condenser grills from our Breezaire parts and accessories collection. Breezaire parts ship free within the contiguous United States.
Installation Tips & When to Call a Professional
DIY Installation:
- Always disconnect power before starting any work.
- Follow the manufacturer’s installation instructions carefully.
- Use only compatible OEM parts.
Call a Professional If:
- You’re unsure about diagnosing or replacing the part.
- The repair involves refrigerant, compressors, or complex electrical work.
- Your unit is still under warranty (to avoid voiding coverage).
Wine Cooling Expert, Wine Cellar Authority
Half the Breezaire parts calls I take are solved before a part ships. A clogged condenser coil or an exhaust pushed into a closet will make a healthy unit look broken. Clean the coil, give the exhaust room, and then order the part if the symptom is still there.
Maintenance Tips to Extend the Life of Your Breezaire Unit
- Every 3 months: inspect and clean the condenser coil. On WKL units, remove the exhaust condenser grille outside the enclosure and vacuum the fins with a brush attachment.
- Keep the exhaust open: the warm air exhaust needs at least 3 feet of unobstructed space into a well-ventilated area.
- Do not drill the unit: Breezaire warns that drilling holes in the unit or the drain hole damages it and voids the warranty.
- Humidity: Breezaire advises adding moisture only by slow, natural evaporation from a small porous water container, not a humidifier.
Our Breezaire maintenance guide covers the full routine, and the video below shows how to set and adjust the unit's settings.
Set and adjust Breezaire settings
A walkthrough of the settings on Breezaire cooling units, useful after replacing a controller or probe.
- Temperature set point
- Controller settings
- Breezaire cooling units
Real questions Breezaire owners ask before they repair a unit or order a part. Tap any question to expand the answer.
Where can I buy Breezaire replacement parts?
Buy genuine parts from Breezaire or an authorized Breezaire dealer. Wine Cellar Authority carries Breezaire compressors, coils, fan assemblies, the Sentry III controller, bottle probes, relays and condenser grills, and Breezaire parts ship free within the contiguous United States.
How do I know which Breezaire part I need?
Start with the model and serial number from the unit label or your purchase records, the series (WKL, WKCE or WKSL) and the symptom or display code. Share those with your dealer to confirm the exact part before ordering.
Can a Breezaire wine cooler be repaired?
Yes. Many components, such as fans, relays, sensors, the controller and coils, are available as replacement parts. Refrigerant, compressor and electrical repairs should be done by a qualified technician, and units under warranty should go through your dealer first.
Why is my Breezaire wine cooler not cooling?
Check that the condenser coil and grill are clean, that the warm air exhaust has at least 3 feet of open space into a ventilated area, and that the enclosure is sealed and insulated. The Sentry III shuts the unit off to protect it if a blocked condenser lets the enclosure overheat.
What does E1 mean on a Breezaire unit?
On the Sentry III controller, E1 flashes with the temperature when the unit started above 75°F and did not detect enough cooling within the first 45 minutes, so it shut off. Restart it with a manual reset or by unplugging it for 10 minutes or more, then find the cause.
How do I reset a Breezaire Sentry III controller?
Press and hold the WARMER button for at least 5 seconds. The display shows 8.8., the software version and then the temperature, and your settings stay in memory. The unit may wait a few minutes before it starts cooling again.
Does Breezaire have authorized dealers?
Yes. Breezaire directs owners to contact their dealer when a problem is suspected, and a unit should not be returned without authorization from Breezaire. Wine Cellar Authority is an authorized dealer for Breezaire units and parts.
Where can I find a Breezaire wine cooler manual?
Breezaire publishes installation instructions for each series (WKL, WKCE and WKSL) and an owner's manual for the Sentry III controller. Ask your dealer for the documents that match your model if you no longer have the originals.
Does using non-Breezaire parts void the warranty?
Breezaire's limited warranty states that alteration, repair or attempted repair of the unit by anyone other than Breezaire voids the warranty. While your unit is covered, contact your dealer before replacing any part.
Need Help Confirming a Breezaire Part?
Send us your model, serial number and symptom and our team will help you find the right genuine part. Breezaire parts ship free within the contiguous United States.
This guidance is general. Refrigerant, compressor and electrical work should be done by a qualified technician following Breezaire's documentation for your model. Warranty terms are summarized from Breezaire's published limited warranty; your dealer and Breezaire have the final word on coverage.
